Heat Press Settings for Sublimation

Heat Press Settings for SublimationTaking in the sublimation imprinting?

That’s cool, and congratulations on this new venture as you are about to unlock another income stream with your heat press business!

Because sublimation is something that just does not happen on the fabric.

And that is the twist where you get the chance to bring in more business —

You do more than fabrics (t-shirts and all that you generally do with HTV pressing.)

But again, sublimation imprinting has almost no visual differences to spot and feels like the same as using regular heat transfer paper.

So, are you specifically looking for the heat press settings for sublimation?

Yes, the settings do vary from material to material, and there comes the play of technicality.

Printing sublimation designs, you have to be somewhat technical and well-prepared to perform such imprinting tasks.

Heat Press Settings for Sublimation Items

We will separate the heat press settings for sublimation being non-drink and drinkware products.

The settings will circle around the right combination of time, temperature, and pressure to properly sync up.

And it also contains the convection oven time to dry it up for a lasting experience,

Make sure the drinkware products are the only ones that go through the phase of the convection oven and do not try stuffing the non-drinkware products as this step is not required for them.

With the best-tested settings for different sublimation items,

We compile up the list of the drinkware and non-drinkware products.

Sublimation Setting Guide for Drinkware Products

Substrate
Temperature Range (F)
Press Time
Pressure
Glass Pint Glasses and Mugs
360F to 390F
Mug Press: 4 to 5 minutes

Convection Oven: 8 to 15 minutes

Light to Medium
Ceramic Mug
380F to 400F
Mug Press: 4 to 5 minutes
Convection Oven: 12 to 15 minutes
Light to Medium
Single Wall Metal
375F to 400F
Mug Press: 2 to 3.5 minutes
Convection Oven: 5 to 6 minutes
Light to Medium
Double Wall Metal
375F to 400F
Mug Press: 2.5 to 4 minutes
Convection Oven: 6 to 8 minutes
Light to Medium

Sublimation Setting Guide for Non-Drinkware Products

Substrate
Temperature Range (F)
Press Time
Pressure
Cotton (t-shirts)
340F to 360F
15 to 30 seconds
Medium
Polyester (t-shirts)
380F to 400F
50 to 60 seconds
Light to Medium
Polyester Blend
375F to 390F
55 to 65 seconds
Light to Medium
Neoprene with polyester-coating
380F to 410F
45 to 55 seconds
Light to Medium
Unisub
400F
Up to 60 seconds
Medium
Hardboard
360F to 400F
50 to 80 seconds
Medium
Chromaluxe Metal
400F
To 60 seconds
Medium
Fiberglass-reinforced Plastics (FRP)
380F to 400F
60 to 75 seconds
Medium
Other Metals (with a different layer of coating)
360F to 400F
50 to 70 seconds
Light to Medium

Conclusion!

These are highly tested and proven heat press settings for sublimation.

These details should never be misjudged as they entirely depend on keeping the materials safe,

Avoiding overheating, and having lasting results.

Definitely the golden resource for the heat press businesses around the world,

Get it printed, place it close to the machine and always take note of the specified settings whenever the sublimation project goes into the heat press machine.

Do not need to memorize but do not ever forget to follow the right setting.

Leave a Comment